New Model #11946
openBaofeng GTR-5 Pro Airband
0%
Description
I can edit the uhf and vhf channels but I cannot make the Air band channels.
Files
Updated by Dan Smith about 2 months ago
You can edit them using what driver selection?
Updated by Mike Iacovacci about 1 month ago
I find Chirp to be consistent with Baofeng CPS. My GT-5R Pro allows me to set airband on VFO A and B but not in the Memories list. VFO A/B are found under [Settings] -> [Work Mode Settings] using the Vendor: Baofeng Model: GT-5R driver.
Updated by Sacha Pulis 28 days ago
I would like to have them in my memory list and give them names :)
On Tue, 13 May 2025 at 07:55, Mike Iacovacci redmine@chirpmyradio.com
wrote:
Updated by Mike Iacovacci 28 days ago
- File GT5r-pro-airband-vfo.png GT5r-pro-airband-vfo.png added
Sacha Pulis wrote in #note-3:
I would like to have them in my memory list and give them names :)
On Tue, 13 May 2025 at 07:55, Mike Iacovacci redmine@chirpmyradio.com
wrote:
Airband is VFO only. This is controlled by the radio firmware and cannot be changed by Chirp. Please reference: https://www.baofengradio.com/products/gt-5r-pro.
Updated by Sacha Pulis 27 days ago
I bought a different one. This is the Baofeng K6. I needed the radio to
sell it for a client. K6 is nice to program with 1000 channels and screen
can be on not like the k5 plus that the screen will be off in standby and
does not know if it one or not.
On Mon, 19 May 2025 at 21:29, Mike Iacovacci redmine@chirpmyradio.com
wrote: